SZKŁO HARTOWANE HOFI UV GLASS PRO+ MOTOROLA EDGE 40 NEO CLEAR
SZKŁO HARTOWANE HOFI UV GLASS PRO+ MOTOROLA EDGE 40 NEO CLEAR
Hofi UV Glass Pro+ tempered glass protects a significant part of the rounded screen, has a hardness of 9h, which is why it is extremely resistant to scratches even when contacting sharp objects, and is additionally covered with an oleophobic coating, which reduces the number of fingerprints.
The UV model is glued with the help of a liquid substance over the entire surface of the screen, and then with a UV lamp the substance is hardened.
Thanks to this combination, we get the perfect effect of smoothness, clarity and responsiveness.
The installation is Easy and pleasant for the user.
Check how to mount: https://www.youtube.com/watch?v=W7UXRE7YWK& ;feature=youtu.Be
* We don't recommend The use of 3D glass without any housing.
** We do not recommend using glass if the housing overlaps too much on the edges of the screen, there is a risk of undermining.
*** The functionality of the fingerprint reader in the screen may be slightly disturbed in the case of installed coatings in the form of foil or glass. The fingerprint reader is not fully refined for additional coatings.
Instructions for assembly:
1) Start assembly in the bathroom just after bathing - water vapor will consume all dust from the atmosphere and it will not be you interfered with the installation.
2) Clean thoroughly and degrease the screen surface, and then with the help of a dry cloth, polish it to a flash.
3) with a ribbon from the set, seal the speaker.
4) connect the UV lamp at Type-C cable help for the power source.
5) Pour the liquid to the very center of the device.
6) Install the glass as much as possible, you can also correct this stage before hardening the surface when the liquid is on the screen together with glass.
7) If a bladder with air appeared, use an ATM card and gently push it out of glass, we do this before hardening.
8) With the help of a UV lamp, harde the glass along the center in five places After 15 seconds and then in about 10 seconds.
9) Clear the phone with residues of hardened glue.
10) If your device has a fingerprint reader in the screen, remember to remove the glass after installing the glass on the screen, remove and add fingerprints again.
11) Enjoy a well-done job!
Product features:
- 100% original
- packed in the original packaging
- 0.3mm thick tempered glass
- scratch resistance 9H
- equipped with an oleophobic coating
- after disassembly it leaves no trace
- Dimensions:
1 x glass Hofi UV Glass Pro+
1 x UV lamp (without Type-C cable)
1 x tube with adhesive
1 x installation set
Brand
Entity responsible for this product in the EU
"FLAVOUR" NORBERT ROZMYSŁOWSKIMore
Address:
Maryli 19Postal code: 02-842City: WarszawaCountry: PolskaE-mail: support@flavour-design.pl
Symbol
9319456606539
Producer code
9319456606539
Device model
Motorola Edge 40 Neo 5G
Producer
HOFI
Product type
Hardened Glass
Condition
New
Ask a question
Write your opinion
Not confirmed by purchase
Score: /5
Not confirmed by purchase
Score: /5
Not confirmed by purchase
Score: /5