TEMPERED GLASS HOFI UV GLASS PRO+ REALME 12 PRO 5G / 12 PRO+ PLUS 5G CLEAR
Hofi UV Glass Pro+ tempered glass protects a significant part of the rounded screen, has a surface hardness of 9H, which is why it is extremely resistant to scratches even when in contact with sharp objects, and is additionally covered with an oleophobic coating that reduces the number of fingerprints.
The UV model is glued using a liquid substance on the entire screen surface, and then the substance is hardened using a UV lamp.
Thanks to this combination, we obtain the perfect effect of smoothness, clarity and responsiveness.
The installation is easy and pleasant for the user.
Check how to install: https://www.youtube.com/watch?v=W7uxROE7ywk&feature=youtu.be
* We do not recommend using 3D glass without any casing.
** We do not recommend using glass if the casing overlaps too much with the edges of the screen, there is a risk of being undermined.
*** The functionality of the fingerprint reader on the screen may be slightly impaired if it is installed coatings in the form of foil or glass. The fingerprint reader is not fully refined in terms of additional coatings.
INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after taking a bath - the water vapor will absorb all the dust from the atmosphere and you will not notice it interfered with the installation.
2) Thoroughly clean and degrease the screen surface, and then use a dry cloth to polish it to a shine.
3) Cover the speaker with the tape from the kit.
4) Connect the UV lamp to using a Type-C cable to the power source.
5) Pour the liquid into the very center of the device.
6) Install the glass as evenly as you can, you can also correct this stage before the surface hardens when the liquid is on the screen along with with glass.
7) If an air bubble appears, use an ATM card and gently push it outside the glass, we do this before hardening.
8) Using a UV lamp, harden the glass along the center in five places after 15 seconds and then around the edges after 10 seconds.
9) Clean the phone from the remains of the hardened glue.
10) If your device has a fingerprint reader on the screen, remember to remove the screen glass after installing the glass. and add fingerprints again.
11) Enjoy a job well done!
PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- Tempered glass, 0.3mm thick
- Scratch resistance 9H
- Equipped with an oleophobic coating
- Leaves no trace after disassembly
- Dimensions: 157x72mm
< br />SET CONTAINS:
1 x Hofi UV Glass Pro+
1 x UV lamp (without Type-C cable)
1 x Tube of glue
1 x Installation kit< br />
